ABB ScreenMaster RVG200 Operating Instructions Manual page 64

ScreenMaster RVG200
Paperless recorder
Referring to Fig. 7.3, set the internal security switch as follows:
1. Isolate the recorder from the power supply.
2. Remove tamper-evident seal
3. Unscrew jacking screw
4. Set security switch
recorder).
Note. The internal security switch is used to access the Configuration level when
is set to Internal switch protected.
security
level when
Configuration security
has been forgotten. The switch overrides password protection, enabling free access to the
Configuration level.
5. Refit the recorder to its case and secure with jacking screw
6. Refit tamper-evident seal
7. Restore the power supply to the recorder.
Fig. 7.3 Setting the security switch
62
A
(if fitted).
B
securing the recorder to the case and remove the recorder from its case.
C
to the 'Configuration level not protected' position (toward the front of the
is set to Password protected (default setting) unless the password
A
(if required).
B
A
use the switch to access the Configuration
Do Not
B
.
Configuration level
not protected
7 Configuration
Configuration
C
Configuration level
protected
OI/RVG200-EN