Lpar Manager System Logs Screen Messages; Summary Of Lpar Manager Screens - Hitachi Compute Blade 2000 User Manual

Summary of LPAR manager screens

The following table shows the summary of the LPAR manager screens.
LPAR manager screens different from those in this manual might be displayed depending
on LPAR manager firmware versions.
# Screen Name
1 LPAR manager menu
2 Logical partition
configuration
3 Logical partition
configuration
4 Physical processor
configuration
5 PCI device information
6 PCI device assignment
7 Virtual NIC (VNIC)
assignment
8 Shared FC assignment
9 Allocated FC information
10 System configuration
11 System service state
12 Date and time
13 Options
14 LPAR usage
15 Front panel
16 LPAR manager system
logs screen messages
17 Firmware version
information
In addition, the relevant subscreen might be displayed when you select the setting
items (by pressing Enter).
Main Use
Displays the index screen of other LPAR manager screens.
Sets the LPAR name, number of processors, and memory size.
Also provides the switching function to the LPAR guest screens,
and sets the LPAR activated (power-on) and deactivated
(power-off).
Configures the logical processors for the LPARs.
Displays the name of the defined LPARs and their power status.
Displays the configuration and status of the physical processors.
Adds, deletes, or changes a processor group.
Displays the PCI device information.
Assigns PCI devices to the LPARs.
Displays the name of the defined LPARs and their status.
Assigns virtual NICs to the LPARs.
The name and status of the defined LPAR are displayed.
Assigns the shared mode Hitachi 4Gbps Fibre-channel adapter to
the LPARs.
The name and status of the defined LPAR are displayed.
Displays the configuration (WWN) of the FCs installed in LPAR
manager.
Sets the LPAR manager system configuration.
Displays the service status of the LPAR manager system.
Sets the LPAR's SEL (System Event Log) time.
Sets the LPAR's RTC (Real Time Clock) time.
Sets the time zone.
Sets the LPAR manager display time.
Sets the time zone in the LPAR manager system.
Adjusts the SEL time and RTC time to the LPAR manager system
time or UTC time.
The name and status of the defined LPAR are displayed.
Sets the LPAR manager optional functions.
Displays the usage status of the LPAR manager system and the
LPARs.
Collects guest dumps and guest screen data.
The name and status of the defined LPAR are displayed.
Displays the various events that occurred in LPAR manager.
Displays the firmware version of each component.
1156