System Configuration - Hitachi Compute Blade 2000 User Manual

System configuration

Example of system configuration
(network)
The following is an example of system configuration in the LPAR manager environment.
This system configuration is described from the network setting view.
Set three LPAR (partitions) on LPAR manager, and configure a task-A server, task-B
server, and common server for each LPAR.
Set Untagged to the task-A server and task-B server with the LPAR manager

virtual LAN-SW, not set VLAN on the OS, and each server communicate with task
LAN-A and task LAN-B respectively. To communicate with the management LAN,
the onboard dedicated NIC is used. VLAN is not set.
Set VLAN to the common server on the OS, which allows it to communicate with

task LAN-A and task LAN-B via LPAR manager virtual LAN-SW with Tagged
setting. To communicate with the management LAN, the onboard dedicated NIC
is used. VLAN is not set.
LPAR manager uses the dedicated NIC, and connects to the management LAN.

Using this path, LPAR manager communicate with SVP and the management
server (SC/BSM) in the management LAN.
1429