Guest Os Operation - Hitachi Compute Blade 2000 User Manual

Guest OS operation

Boot the guest OS
This section describes how to activate an LPAR and how to boot the OS.
 Assigning USB device
1 Check if a USB device is assigned. If the USB device has been assigned, skip this
step. See Assign USB devices to
 Activating LPARs
1 On the Logical Partition Configuration screen, press F3: Activate.
2 On the Activate LPAR subscreen, select an LPAR to activate, and press Enter.
+------------------------------------------------------------------------------+
|+- Logical Partition(LPAR) Configuration ------------------------------------+|
|| # Name Sta Pro Shr Ded Srv
|| 1 LPAR1 Dea
|| 2 LPAR2 Dea
|| 3 LPAR3 Dea
|| 4 LPAR4 Dea
|| 5
|| 6
|| 7
|| 8
|| 9
|| 10
||
|+-----------------------------| 4 LPAR4
|+- Logical Information -------+---------------+++- Physical Information -----+|
||
|| Assign Total
|| Act Total
|| Remain
|+----------------------------------------------++----------------------------+|
| Logical partition name
+------------------------------------------------------------------------------+
| F2:Mem Alloc Dsp F3:Act F4:Deact F5:React F6:Add F7:Remove
+------------------------------------------------------------------------------+
LPARs.
Mem VN ID AA AC PC VC PB
2 0 2 100 2048 0 Y 1 N * N BIOS
1 0 1 100 1024 0 Y 2 N * N BIOS
1 0 1 100 1024 0 Y * N * N BIOS
1 0 1 100 1024 0 Y * N * N BIOS
+---------------+
| Activate LPAR |
| |
| 1 LPAR1 |
| 2 LPAR2 |
| 3 LPAR3 |age Up / [PageDown]:Page Down ||
|------------------------------+|
Pro Shr Ded Mem VN || User Memory
5 0 5 5120 0 || Processors
0 0 0 0 0 ||
4608 ||
1090
||
||
||
||
||
||
||
||
||
||
||
: 4608 MB ||
: 8(8) ||
Shared : 0 ||
Dedicate : 0 ||
|
Esc:Menu |