Lpar Manager Partition Setting - Hitachi Compute Blade 2000 User Manual

LPAR manager partition setting

The following table shows LPAR manager partition setting items.
Setting screen & Setting field
LPAR manager screen
Logical partition configuration
LPAR creation
LPAR name
CPU schedule (Shr/Ded or
Scd))
CPU number (Pro)
Processor group (Grp)
Memory size (Mem)
Service rate (Srv)
Memory node (MN)
Idle detection (ID)
ProcessorCapping (PC)
AutoAct setting (AA)
AutoClear setting (AC)
Virtual COM console (VC)
Pre-boot setting (PB)
Logical processor configuration
Dedicated processor
mapping
Physical processor configuration
Processor group number
setting
PCI device assignment
PCI device schedule (Schd)
PCI device assignment
(Type:U)
PCI device assignment
(Type:N)
PCI device assignment
(Type:F)
VNIC assignment
VNIC device type
Description for setting field
Creates LPAR (Logical PARtition).
8-character name is recommended.
Up to 31 English characters or numbers
can be used.
Dedicated or Shared
Number of CPUs for LPAR
A processor group number
LPAR memory size (in 256 MB unit)
LPAR service rate of a shared CPU
Sets a memory node number to assign to
LPAR only when NUMA is enabled.
Idle detection function of a guest CPU
Capping function for shared CPU service
Activates LPAR automatically when LPAR
manager boots.
Automatically clears SEL for LPAR
Set "Y" or a VC number when using the
virtual COM console.
None but BIOS can be selected.
Relates a physical CPU to a logical CPU.
Sets the number of a processor group.
Dedicated (D) or Shared (S)
Assigns the front USB and remote console
to LPAR.
Assigns the Network card to LPAR
Assigns HBA to LPAR.
Sets the type of a VNIC device
1421
Default
No LPAR
definition
NO_NAME
Dedicated
1
0
1024
100
A
Y
* Not
assigned.
* Not
assigned.
N
N
BIOS
D *1
0
Dedicated
A (Assign.)
- (Assign-
ment not
allowed)
- (Assign-
ment not
allowed.)
NIC1