Cautions - Hitachi Compute Blade 2000 User Manual

Cautions

This section describes the cautions when using LPAR manager. For those interested in system
equipment, see Chapter 13: System Operation and Management.
Emulex 10 Gb NIC-1 Gb Switch Module
Emulex 10 Gb NIC-1 Gb Switch Module is supported under the following conditions.
When updating Emulex 10 Gb NIC driver to 4.2.390.6 or later for Windows or 4.2.456.0 or
later for Linux, update Emulex 10 Gb NIC firmware to 4.2.433.604 or later.
When updating LPAR manager firmware to 59-4X/79-4X or later, update Emulex 10 Gb
NIC firmware to 4.2.433.604 or later. See the following table.
Emulex
4.1.334.2801
10Gb
or lower
NIC
4.2.433.604
firmware
or later
version
Emulex 10 Gb NIC-10 Gb Switch Module
Emulex 10 Gb NIC-10 Gb Switch Module is supported under the following conditions.
When updating Emulex 10 Gb NIC driver to 4.2.390.6 or later for Windows or 4.2.456.0 or
later for Linux, update Emulex 10 Gb NIC firmware to 4.2.433.604 or later.
When updating LPAR manager firmware to 59-4X/79-4X or later, update Emulex 10 Gb
NIC firmware to 4.2.433.604 or later.
Emulex
4.1.334.2801
10Gb
or lower
NIC
4.2.433.604
firmware
or later
version
Emulex 10 Gb NIC driver version
Windows Linux
4.1.334. 4.2.390. 4.1.334.
25 or 6 or 18 or
lower later lower
Not Not Not
supported supported supported
Not Not
Supported
supported supported
Emulex 10 Gb NIC driver version
Windows Linux
4.1.334. 4.2.390. 4.1.334.
25 or 6 or 18 or
lower later lower
Not
Supported Supported
supported
Supported Supported Supported
1371
LPAR manager
firmware version
4.2.456. 59-3X/ 59-4X/
0 or 79-3X 79-4X or
later or lower later
Not Not Not
supported supported supported
Not
Supported Supported
supported
LPAR manager
firmware version
4.2.456. 59-3X/ 59-4X/
0 or 79-3X 79-4X or
later or lower later
Not Not
Supported
supported supported
Supported Supported Supported