A/T Fluid Cooler Hoses Inspection; A/T Fluid Cooler Hoses Replacement; A/T Relay Inspection - Suzuki 2006 SX4 Service Manual

5A-82 Automatic Transmission/Transaxle:

A/T Fluid Cooler Hoses Inspection

Check automatic transaxle fluid cooler hoses (1) for fluid
leakage, cracks, damage and deterioration. Replace
hose and/or clamp if any faulty condition is found.
1

A/T Fluid Cooler Hoses Replacement

The rubber hoses for the A/T fluid cooler should be
replaced at specified interval. When replacing them, be
sure to note the following.
• to replace clamps at the same time
• to insert hose as far as its limit mark
• to clamp clamps securely
2
1
1. Radiator
2. Inlet hose (Outlet from A/T fluid cooler)
3. Outlet hose (Inlet to A/T fluid cooler)

A/T Relay Inspection

S6RW0C5106072
1) Disconnect negative cable at battery.
2) Remove A/T relay (1), from fuse box.
3) Check that there is no continuity between terminal
"c" and "d". If there is continuity, replace relay.
4) Connect battery positive (+) terminal to terminal "b"
of relay. Connect battery negative (-) terminal to
terminal "a" of relay. Check for continuity between
terminal "c" and "d". If there is no continuity when
relay is connected to the battery, replace relay.
1
I6RW0C510006-01
S6RW0C5106026
3
I4RH01510258-01
"a"
"c"
"b"
"d"
S6RW0C5106027
1
I7RW01510059-02