Suzuki 2006 SX4 Service Manual page 729

91) Install transmission range sensor assembly.
a) Install transmission range sensor plate (1) to
groove of solenoid harness.
b) Install transmission range sensor (2) to manual
valve lever shaft (3).
c) Place lock washer (4).
d) Insert transmission range sensor bolts.
e) Tighten transmission range sensor lock nut (5) to
specified torque and then bend claws lock
washer.
Tightening torque
Transmission range sensor lock nut (a): 7.0
N·m (0.7 kgf-m, 5.0 lb-ft)
f) Install manual shift lever (6), washer (7) and
tighten nut (8) to specified torque.
Tightening torque
Manual select lever nut (b): 12 N·m (1.2 kgf-
m, 8.7 lb-ft)
g) Adjust transmission range sensor.
h) Tighten transmission range sensor bolt and nut
to specified torque.
Tightening torque
Transmission range sensor bolt (c): 25 N·m (
2.5 kgf-m, 18.0 lb-ft)
Transmission range sensor nut (d): 7.5 N·m (
0.75 kgf-m, 5.5 lb-ft)
(d)
1
8, (b)
7
6
5, (a)
4
(c)
3
2
I5RH01510023-01
Automatic Transmission/Transaxle:
92) Install torque converter (1) to input shaft.
a) Install torque converter (1), using care not to
damage oil seal of oil pump.
b) After installing torque converter (1), check that
distance "a" is within specification.
Distance between torque converter and
mating surface of transaxle housing (3)
"a": 21.5 mm (0.846 in.) or more
c) Check torque converter (1) for smooth rotation.
CAUTION
!
• Before installing converter, make sure that
its pump hub portion is free from nicks,
burrs or damage which may cause oil seal
to leak.
• Be very careful not to drop converter on oil
pump gear. Damage in gear, should it
occur, may cause a critical trouble.
2. Flange nut
5A-141
I2RH01510269-01