5A-126 Automatic Transmission/Transaxle:
Differential Components
1. Differential side right bearing race
2. Bolt
3. Differential gear assembly
4. Final gear
Differential Preliminary Check
Differential Assembly Starting Torque
1) Install differential assembly (1) to transaxle case and
tighten case bolts to specified torque.
Tightening torque
Transaxle housing bolts: 30 N·m (3.0 kgf-m, 22
lb-ft)
2) Measure differential assembly starting torque, using
special tool. If starting torque exceeds specified
value, replace shim in the following so as starting
torque to be in standard value.
4
3
5. Ring gear set bolt lock plate
6. Differential side left bearing race
7. Shim
Starting torque of differential assembly
S6RW0C5106065
0.7 – 1.2 N⋅m (0.07 – 0.12 kgf-m, 0.506 – 0.868 lb-
ft)
Special tool
(A): 09928–06060
5
7
6
2
99 N·m(9.9 kg-m)
1
: Apply automatic transaxle fluid.
: Tightening torque
: Do not reuse.
(A)
1
S6RW0C5106064
I4RH01510178-01
I4RH01510179-01