9G-3 Seats:
Rear Seat Removal and Installation
Removal
1) Fold rear seat back forward.
2) Remove seat mounting bolts and nuts to remove seat assembly.
3) Disassemble and repair seat as necessary.
Installation
Reverse removal procedure to install rear seat.
• Torque to specifications in "Rear Seat Components".
Tightening Torque Specifications
NOTE
The specified tightening torque is also described in the following.
"Front Seat Components"
"Rear Seat Components"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information in Section 0A".
Recommended Service Material
NOTE
Required service material is also described in the following.
"Front Seat Components"
"Rear Seat Components"
Specifications
Special Tools and Equipment
S6RW0C9706004
S6RW0C9707001
S6RW0C9708001