Ballast Removal And Installation (Discharge Headlight Model); Igniter Removal And Installation (Discharge Headlight Model) - Suzuki 2006 SX4 Service Manual

Ballast Removal and Installation (Discharge
Headlight Model)
WARNING
!
Be sure to read "Precautions for Discharge
Headlight Service (If Equipped)" carefully
before working. Neglecting them may result
in personal injury.
Removal
1) Check to ensure that lighting switch is at OFF
position.
2) Disconnect negative (–) cable at battery.
3) Remove headlight housing referring to "Headlight
Housing Removal and Installation".
4) Remove ballast (1) from headlight housing (2).
5) Disconnect connector (3) from ballast.
Installation
Reverse removal procedure noting the following.
• Connect connectors securely.
• After installation, be sure to inspect and adjust aiming
referring to "Headlight Aiming Adjustment with
Screen".
Igniter Removal and Installation (Discharge
Headlight Model)
S6RW0C9206023
Be sure to read "Precautions for Discharge
Headlight Service (If Equipped)" carefully
before working. Neglecting them may result
in personal injury.
Removal
1) Remove ballast referring to "Ballast Removal and
Installation (Discharge Headlight Model)".
2) Remove cover (1) from headlight housing by turning
it counterclockwise.
3) Remove igniter (2) from discharge headlight bulb by
turning it counterclockwise.
4) After disconnecting ground wire (3), pull out igniter
(2) from headlight housing.
2
1
3
Installation
Reverse removal procedure noting the following.
I6RW0C920016-02
• Connect connectors securely.
• After installation, be sure to inspect and adjust aiming
referring to "Headlight Aiming Adjustment with
Screen".
Lighting Systems:
WARNING
!
3
2
9B-21
S6RW0C9206024
1
I6RW0C920017-01