Cancel Conditions Of Cruise Control System; Input / Output Diagram - Suzuki 2006 SX4 Service Manual

10A-3 Cruise Control System:

Cancel Conditions of Cruise Control System

Constant cruising is cancelled under the following
conditions.
• Ignition switch is turned OFF.
• MAIN (ON/OFF) switch is turned OFF.
• *Vehicle speed becomes lower than minimum
operating speed (40 km/h (25 mile/h)).
• *Vehicle speed varies beyond cancel speed range
(20% decrease from preset speed).
• *Brake pedal is depressed (Brake light switch is
turned ON).

Input / Output Diagram

Input
Cruise control switch
MAIN (ON/OFF) switch
RES/ACC switch
SET/COAST switch
CANCEL switch
CPP switch
(M/T model)
Brake light switch
Transmission range switch
( or range signal)
"P", "R" "N"
(A/T model)
Wheel speed sensor
(vehicle speed signal)
ABS control module
• *Clutch pedal is depressed (Clutch pedal position
S6RW0CA101003 switch is turned ON) (M/T model).
• *Selector lever is shifted to "P", "R" or "N" range (A/T
model).
• *CANCEL switch is turned ON.
NOTE
When constant cruising is cancelled under
any condition with * (asterisk), vehicle speed
before cancellation can be resumed by
operating RES/ACC switch, provided that
vehicle speed is higher than 40 km/h (25 mile/
h).
ECM
S6RW0CA101004
Output
Electric throttle body
(throttle valve control)
Combination meter
(Indicator light control)
TCM (Shift control)
(A/T model)
I6RW0CA10001-01