Repair Instructions; Evap System Components; Evap Canister Purge Inspection - Suzuki 2006 SX4 Service Manual

Hide thumbs Also See for 2006 SX4:

Table of Contents

1. EVAP canister

2. EVAP canister bracket

3. Suction hose

4. EVAP canister purge valve

5. EVAP canister purge valve bracket

6. Purge hose No.3

Before inspection, check to make sure that

gear shift lever is in neutral position (with A/T

model, selector lever in "P" range) and that

parking brake lever is pulled all the way up.

1) Disconnect purge hose (1) from purge valve

2) Place finger against the end of disconnected hose

and check that vacuum is not felt there when engine

is cool and running at idle speed. If check result is

not satisfactory, check EVAP canister purge valve,

wire harness and ECM.

Repair Instructions

7. Purge hose No.1

8. Purge pipe No.1

9. Purge pipe No.2

10. EVAP canister purge hose

11. Purge valve chamber

12. Purge hose No.2

S6RW0C1206002

Aux. Emission Control Devices:

14. Vapor control hose

15. To intake manifold

16. To fuel tank

17. To fuel filler neck

: 5 N⋅m (0.5 kgf-m, 4.0 lb-ft)

S6RW0C1206001

I6RW0C120001-01

I7RW01120001-01

Table of Contents