Bind Ip To Mac - Draytek Vigor2830 Series User Manual

4 . 2 . 5 B i n d I P t o M
4 . 2 . 5 B i n d I P t o M
This function is used to bind the IP and MAC address in LAN to have a strengthening control
in network. When this function is enabled, all the assigned IP and MAC address binding
together cannot be changed. If you modified the binding IP or MAC address, it might cause
you not access into the Internet.
Click LAN and click Bind IP to MAC to open the setup page.
Enable
Disable
Strict Bind
ARP Table
Select All
Sort
Refresh
Add and Edit
A C
A C
Click this radio button to invoke this function. However, IP/MAC
which is not listed in IP Bind List also can connect to Internet.
Click this radio button to disable this function. All the settings on
this page will be invalid.
Click this radio button to block the connection of the IP/MAC
which is not listed in IP Bind List.
This table is the LAN ARP table of this router. The information
for IP and MAC will be displayed in this field. Each pair of IP
and MAC address listed in ARP table can be selected and added
to IP Bind List by clicking Add below
Click this link to select all the items in the ARP table.
Reorder the table based on the IP address.
Refresh the ARP table listed below to obtain the newest ARP
table information.
IP Address – Type the IP address that will be used for the
specified MAC address.
Mac Address – Type the MAC address that is used to bind with
the assigned IP address.
133
.
Vigor2830 Series User's Guide