Draytek Vigor2830 Series User Manual page 50

W A N 2
W A N 2
WAN2 is fixed with physical mode of Giga Ethernet.
Enable
Display Name
Physical Mode
Physical type
Line Speed
VLAN Tag insertion
Active Mode and Backup Active Mode – Determine the WAN interface will be active for
Vigor2830 Series User's Guide
w i t h E t h e r n e t
w i t h E t h e r n e t
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
Display the physical mode of such WAN interface.
You can change the physical type for WAN2 or choose Auto
negotiation for determined by the system.
If your choose According to Line Speed as the Load Balance
Mode, please type the line speed for downloading and
uploading for such WAN interface. The unit is kbps.
Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on the
WAN while sending them out.
Please type the tag value and specify the priority for the packets
sending by WAN1.
Disable – Disable the function of VLAN with tag.
Tag value – Type the value as the VLAN ID number. The
range is form 0 to 4095.
Priority – Type the packet priority number for such VLAN.
The range is from 0 to 7.
38