Backup WAN
W
A
N
2
w
i
t
h
E
t
h
e
r
n
W
A
N
2
w
i
t
h
E
t
h
e
r
n
WAN2 is fixed with physical mode of Ethernet.
Enable
Display Name
Physical Mode
Physical type
If you choose Backup as the Active Mode, Backup WAN will
be changed into Backup Type. You have to specify which role
the WAN interface should play if you want to backup multiple
WANs. However, ignore this setting if you want to backup a
single WAN.
When any WAN disconnect – Such backup WAN will be
activated when any master WAN interface disconnects.
When all WAN disconnect – Such backup WAN will be
activated only when all master WAN interfaces disconnect.
e
t
e
t
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
Display the physical mode of such WAN interface.
You can change the physical type for WAN2 or choose Auto
negotiation for determined by the system.
97
Vigor2830 Series User's Guide