Sip Accounts - Draytek Vigor2830 Series User Manual

4 . 1 2 . 2 S I P A c
4 . 1 2 . 2 S I P A c
In this section, you set up your own SIP settings. When you apply for an account, your SIP
service provider will give you an Account Name or user name, SIP Registrar, Proxy, and
Domain name. (The last three might be the same in some case). Then you can tell your folks
your SIP Address as in Account Name@ Domain name
As Vigor VoIP Router is turned on, it will first register with Registrar using
AuthorizationUser@Domain/Realm. After that, your call will be bypassed by SIP Proxy to the
destination using AccountName@Domain/Realm as identity.
Note: Selection items for Ring Port will differ according to the router you have.
Index
Profile
Domain/Realm
Proxy
Account Name
Ring Port
Vigor2830 Series User's Guide
c o u n t s
c o u n t s
Click this link to access into next page for setting SIP account.
Display the profile name of the account.
Display the domain name or IP address of the SIP registrar
server.
Display the domain name or IP address of the SIP proxy server.
Display the account name of SIP address before @.
Specify which port will ring when receiving a phone call. Set
Phone, ISDN1-S0 or ISDN-TE as the default ring port for the
SIP account. If you choose Phone or ISDN1-S0, the ISDN2-TE
selection will be dimmed, vice versa. There are ten internal
246