Draytek Vigor2830 Series User Manual page 113

D e t a i l s P a g e f o r P
D e t a i l s P a g e f o r P
To choose PPPoE /PPPoA as the accessing protocol of the Internet, please select
PPPoE/PPPoA from the WAN>>Internet Access >>WAN1 page. The following web page
will be shown.
Enable/Disable
DSL Modem Settings
P P o E / P P P o A i n W
P P o E / P P P o A i n W
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
Set up the DSL parameters required by your ISP. These are
vital for building DSL connection to your ISP.
Multi-PVC channel - The selections displayed here are
determined by the page of Internet Access >> Multi PVCs.
Select M-PVCs Channel means no selection will be chosen.
VPI - Type in the value provided by ISP.
VCI - Type in the value provided by ISP.
Encapsulating Type - Drop down the list to choose the type
provided by ISP.
Protocol - Drop down the list to choose the one (PPPoE or
PPPoA) provided by ISP.
If you have already used Quick Start Wizard to set the
protocol, then it is not necessary for you to change any settings
in this group.
101
A N 1
A N 1
Vigor2830 Series User's Guide