Draytek Vigor2830 Series User Manual page 57

D e t a i l s P a g e f o r M
D e t a i l s P a g e f o r M
MPoA is a specification that enables ATM services to be integrated with existing LANs,
which use either Ethernet, or TCP/IP protocols. The goal of MPoA is to allow different LANs
to send packets to each other via an ATM backbone.
To use MPoA as the accessing protocol of the Internet, select MPoA mode. The following
web page will appear.
Enable/Disable
DSL Modem Settings
WAN Connection
Detection
P o A i n W A N 1
P o A i n W A N 1
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
Set up the DSL parameters required by your ISP. These are
vital for building DSL connection to your ISP.
Multi-PVC channel - The selections displayed here are
determined by the page of Internet Access – Multi PVCs.
Select M-PVCs Channel means no selection will be chosen.
Encapsulating Type - Drop down the list to choose the type
provided by ISP.
VPI - Type in the value provided by ISP.
VCI - Type in the value provided by ISP.
Modulation – Drop down the list to choose a proper
modulation for the router.
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect.
Mode – Choose ARP Detect or Ping Detect for the system to
execute for WAN detection.
45
Vigor2830 Series User's Guide