Draytek Vigor2830 Series User Manual page 130

T a g - b a
T a g - b a
Tag-based Bridge defines which LAN port will be used as a bridge and which tag will be used
on the LAN port. Tag-Based Bridge defines virtual WAN tag for Vigor router. Basically, one
channel can have one Tag ID.
Enable
VLAN Tag
Service Type
Enable switch add Tag
Vigor2830 Series User's Guide
s e d B r i d g e
s e d B r i d g e
Check this box to enable that channel. Only channel 3 to 8 can
be set in this page, for channel 1 to 2 are reserved for NAT
using.
To identify the usage of PVC, check this box to invoke this
setting. And type the number for VLAN ID (number).
Normally, service type is used for the service of video stream
(e.g., IPTV). It can divide the packets from remote control and
from video stream into different PVC. In general, the protocol
used by remote control is IGMP.
Normal – It means that the PVC can accept all packets except
IGMP.
IGMP – It means that the PVC can accept packets of IGMP
only.
Check this box to enable the function.
118