Draytek Vigor2830 Series User Manual page 116

D e t a i l s
D e t a i l s
MPoA is a specification that enables ATM services to be integrated with existing LANs,
which use either Ethernet, token-ring or TCP/IP protocols. The goal of MPoA is to allow
different LANs to send packets to each other via an ATM backbone.
To use MPoA as the accessing protocol of the Internet, select MPoA from the
WAN>>Internet Access >>WAN1 page. The following web page will appear.
Enable/Disable
DSL Modem Settings
Vigor2830 Series User's Guide
P a g e f o r M P o A i n
P a g e f o r M P o A i n
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
Set up the DSL parameters required by your ISP. These are
vital for building DSL connection to your ISP.
Multi-PVC channel - The selections displayed here are
determined by the page of Internet Access >>Multi PVCs.
Select M-PVCs Channel means no selection will be chosen.
Encapsulating - Drop down the list to choose the type
provided by ISP.
VPI - Type in the value provided by ISP.
VCI - Type in the value provided by ISP.
Modulation –Default setting is Multimode. Choose the one that
fits the requirement of your router.
W A N 1
W A N 1
104