Draytek Vigor2830 Series User Manual page 67

Dest Port End
Move UP/Move Down
Click Index 1 to access into the following page for configuring load-balance policy.
Enable
Protocol
Binding WAN interface
Src IP Start
Src IP End
Dest IP Start
Dest IP End
Dest Port Start
Dest Port End
Displays the IP address for the end of the destination port.
Use Up or Down link to move the order of the policy.
Check this box to enable this policy.
Use the drop-down menu to choose a proper protocol for the
WAN interface.
Choose the WAN interface (WAN1 / WAN2 / WAN3) for
binding.
Auto failover to other WAN – Check this button to lead the data
passing through other WAN automatically when the selected
WAN interface is failover.
Type the source IP start for the specified WAN interface.
Type the source IP end for the specified WAN interface. If this
field is blank, it means that all the source IPs inside the LAN will
be passed through the WAN interface.
Type the destination IP start for the specified WAN interface.
Type the destination IP end for the specified WAN interface. If
this field is blank, it means that all the destination IPs will be
passed through the WAN interface.
Type the destination port start for the destination IP.
Type the destination port end for the destination IP. If this field is
blank, it means that all the destination ports will be passed
55
Vigor2830 Series User's Guide