General Setup - Draytek Vigor2830 Series User Manual

automatically. The supported 3G USB Modem will be listed on DrayTek web site. Please visit
www.draytek.com for more detailed information.
Below shows the menu items for WAN.
4 . 1 . 2 G e n e r a l S e
4 . 1 . 2 G e n e r a l S e
This section will introduce some general settings of Internet and explain the connection modes
for WAN1, WAN2 and WAN3 in details.
This router supports multiple-WAN function. It allows users to access Internet and combine
the bandwidth of the multiple WANs to speed up the transmission through the network. Each
WAN port can connect to different ISPs, Even if the ISPs use different technology to provide
telecommunication service (such as DSL, Cable modem, etc.). If any connection problem
occurred on one of the ISP connections, all the traffic will be guided and switched to the
normal communication port for proper operation. Please configure WAN1, WAN2 and WAN3
settings.
This webpage allows you to set general setup for WAN1, WAN2 and WAN3 respectively.
Load Balance Mode
Index
Enable
Physical Mode / Type
Line Speed
Active Mode
t u p
t u p
This option is available for multiple-WAN for getting enough
bandwidth for each WAN port. If you know the practical
bandwidth for your WAN interface, please choose the setting of
According to Line Speed. Otherwise, please choose Auto
Weigh to let the router reach the best load balance.
Click the WAN interface link under Index to access into the
WAN configuration page.
V means such WAN interface is enabled and ready to be used.
Display the physical mode and physical type of such WAN
interface.
Display the downstream and upstream rate of such WAN
interface.
Display whether such WAN interface is Active device or backup
95
Vigor2830 Series User's Guide