Draytek Vigor2830 Series User Manual page 108

Backup WAN
Note: In default, each WAN port is enabled.
W W A A N N 1 1
WAN1 is fixed with physical mode of ADSL.
Enable
Display Name
Physical Mode
Physical type
Line Speed
VLAN Tag insertion
Active Mode
Vigor2830 Series User's Guide
device.
Display the Backup WAN interface for such WAN when it is
disabled.
w w i i t t h h A A D D S S L L
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Type the description for such WAN interface.
Display the physical mode of such WAN interface.
In such WAN interface, no type can be selected.
If your choose According to Line Speed as the Load Balance
Mode, please type the line speed for downloading and
uploading for such WAN interface. The unit is kbps.
Enable – Enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on the
WAN while sending them out.
Please type the tag value and specify the priority for the packets
sending by WAN1.
Disable – Disable the function of VLAN with tag.
Tag value – Type the value as the VLAN ID number. The
range is form 0 to 4095.
Priority – Type the packet priority number for such VLAN.
The range is from 0 to 7.
Choose Always On to make the WAN1 connection being
activated always;
96