Draytek Vigor2830 Series User Manual page 200

To activate the function of limit session, simply click Enable and set the default session limit.
Enable
Disable
Default session limit
Limitation List
Start IP
End IP
Maximum Sessions
Add
Edit
Remove
Administration Message
Vigor2830 Series User's Guide
Click this button to activate the function of limit session.
Click this button to close the function of limit session.
Defines the default session number used for each computer in
LAN.
Displays a list of specific limitations that you set on this web
page.
Defines the start IP address for limit session.
Defines the end IP address for limit session.
Defines the available session number for each host in the
specific range of IP addresses. If you do not set the session
number in this field, the system will use the default session
limit for the specific limitation you set for each index.
Adds the specific session limitation onto the list above.
Allows you to edit the settings for the selected limitation.
Remove the selected settings existing on the limitation list.
Type the words which will be displayed when reaches the
188