Management - Draytek Vigor2830 Series User Manual

4 . 1 5 . 8 M a n a g e m
4 . 1 5 . 8 M a n a g e m
This page allows you to manage the settings for access control, access list, port setup, and
SNMP setup. For example, as to management access control, the port number is used to
send/receive SIP message for building a session.
Router Name
Allow management from
the Internet
Disable PING from the
Internet
Access List
Default Ports
User Defined Ports
Enable SNMP Agent
Get Community
e n t
e n t
Type in the router name provided by ISP.
Enable the checkbox to allow system administrators to login
from the Internet. There are several servers provided by the
system to allow you managing the router from Internet. Check
the box(es) to specify.
Check the checkbox to reject all PING packets from the Internet.
For security issue, this function is enabled by default.
You could specify that the system administrator can only login
from a specific host or network defined in the list. A maximum
of three IPs/subnet masks is allowed.
List IP - Indicate an IP address allowed to login to the router.
Subnet Mask - Represent a subnet mask allowed to login to the
router.
Check to use standard port numbers for the Telnet and HTTP
servers.
Check to specify user-defined port numbers for the Telnet,
HTTP and FTP servers.
Check it to enable this function.
Set the name for getting community by typing a proper
character. The default setting is public.
289
Vigor2830 Series User's Guide