Security - Draytek Vigor2830 Series User Manual

3 . 5 . 3 S e c u r i t y
3 . 5 . 3 S e c u r i t y
By clicking the Security Settings, a new web page will appear so that you could configure the
settings of WEP and WPA.
The default security mode is Mixed (WPA+WPA2)/PSK. Default Pre-Shared Key (PSK) is
provided and stated on the label pasted on the bottom of the router. For the wireless client who
wants to access into Internet through such router, please input the default PSK value for
connection.
Mode
Vigor2830 Series User's Guide
packet. Most modern wireless network uses short preamble
with 56 bit sync field instead of long preamble with 128 bit
sync field. However, some original 11b wireless network
devices only support long preamble. Check it to use Long
Preamble if needed to communicate with this kind of devices.
There are several modes provided for you to choose.
Disable - Turn off the encryption mechanism.
WEP-Accepts only WEP clients and the encryption key should
be entered in WEP Key.
WPA/PSK-Accepts only WPA clients and the encryption key
should be entered in PSK.
76