Draytek Vigor2830 Series User Manual page 210

Auto-Update interval
Index
WAN Interface
Domain Name
Active
View Log
Force Update
3. Select Index number 1 to add an account for the router. Check Enable Dynamic DNS
Account, and choose correct Service Provider: dyndns.org, type the registered hostname:
hostname and domain name suffix: dyndns.org in the Domain Name block. The
following two blocks should be typed your account Login Name: test and Password: test.
Enable Dynamic DNS
Account
WAN Interface
Vigor2830 Series User's Guide
Set the time for the router to perform auto update for
DDNS service.
Click the number below Index to access into the setting
page of DDNS setup to set account(s).
Display the WAN interface used.
Display the domain name that you set on the setting page
of DDNS setup.
Display if this account is active or inactive.
Display DDNS log status.
Force the router updates its information to DDNS server.
Check this box to enable the current account. If you did
check the box, you will see a check mark appeared on the
Active column of the previous web page in step 2).
WAN1/WAN2/WAN3 First - While connecting, the
router will use WAN1/WAN2/WAN3 as the first channel
for such account. If WAN1/WAN2/WAN3 fails, the
router will use another WAN interface instead.
WAN1/WAN2/WAN3 Only - While connecting, the
router will use WAN1/WAN2/WAN3 as the only channel
for such account.
198