Draytek Vigor2830 Series User Manual page 54

Access Mode
Details Page
D e t a i l s
D e t a i l s
PPPoA, included in RFC1483, can be operated in either Logical Link Control-Subnetwork
Access Protocol or VC-Mux mode. As a CPE device, Vigor router encapsulates the PPP
session based for transport across the ADSL loop and your ISP's Digital Subscriber Line
Access Multiplexer (DSLAM).
To choose PPPoE or PPPoA as the accessing protocol of the internet, please select
PPPoE/PPPoA from the Internet Access menu. The following web page will be shown.
Enable/Disable
DSL Modem Settings
Vigor2830 Series User's Guide
(Ethernet) /WAN3 (3G USB Modem) according to the real
network connection.
Use the drop down list to choose a proper access mode. The
details page of that mode will be popped up. If not, click
Details Page for accessing the page to configure the settings.
This button will open different web page according to the
access mode that you choose in WAN interface
P a g e f o r P P P o E / P
P a g e f o r P P P o E / P
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
Set up the DSL parameters required by your ISP. These are
vital for building DSL connection to your ISP.
Multi-PVC channel - The selections displayed here are
determined by the page of Internet Access – Multi PVCs.
Select M-PVCs Channel means no selection will be chosen.
VPI - Type in the value provided by ISP.
P P o A i n W A N 1
P P o A i n W A N 1
42