Static Route - Draytek Vigor2830 Series User Manual

4 . 2 . 3 S t a t i c R
4 . 2 . 3 S t a t i c R
Go to LAN to open setting page and choose Static Route.
Index
Destination Address
Status
Viewing Routing Table
Vigor2830 Series User's Guide
Use LAN Port – Specify an IP for IP Route Subnet. If it is
enabled, DHCP server will assign IP address automatically for the
clients coming from P1 and/or P2. Please check the box of P1 and
P2.
Use MAC Address - Check such box to specify MAC address.
MAC Address: Enter the MAC Address of the host one by one
and click Add to create a list of hosts to be assigned, deleted or
edited IP address from above pool. Set a list of MAC Address for
nd
2
of the correct subnet to the correct host. So those hosts in 2
subnet won't get an IP address belonging to 1
Add – Type the MAC address in the boxes and click this button to
add.
Delete – Click it to delete the selected MAC address.
Edit – Click it to edit the selected MAC address.
Cancel – Click it to cancel the job of adding, deleting and editing.
o u t e
o u t e
The number (1 to 10) under Index allows you to open next page
to set up static route.
Displays the destination address of the static route.
Displays the status of the static route.
Displays the routing table for your reference.
DHCP server will help router to assign the correct IP address
128
nd
st
subnet.