Push Buttons; Led Indications; Figure 2-7 Six Push Buttons; Figure 2-8 Diagnostics Led - Honeywell VideoBloX User Manual

Off
Off
Off
Off
Off
On
Note: Each group has 64 output channel addresses, 0 is 1-64; 1 is 65-128 etc. This
output group of output board and input board should be same in one chassis, otherwise
the switch function can't work.

Push Buttons

Push buttons on the front panel (see
parameters.

Figure 2-7 Six Push Buttons

Push Button
If buttons are pressed while the chassis is powered up (or reset), then additional
functions are possible:

LED Indications

LEDs on the front panel are used to display working status of the chassis.

Figure 2-8 Diagnostics LED

Off Off
Off Off
Off Off
Off On
Off On
On On
ESC Exit the operation
Left Select previous diagnostic parameter
Right Select next diagnostic parameter
Up Select previous diagnostic screen
Down Select next diagnostic screen
ENTER Select corresponding menu
Off On
On Off
On On
Off Off
Off On
On On
Figure 2-7 ) are used to select various diagnostic
Button Function
1
2
3
4
5
31
Honeywell
13