Device Group Names; Figure 3-56 Device - Group Names Configuration - Honeywell VideoBloX User Manual

SYSTEM CONFIGURATION
GROUP NAME
(COLUMN)
ACCESS (ROW)
Steps for Configuring Device Access
1. From the Devices screen, click on the Access Tab.
2. Set access for each device using the following methods:
3. Select

Device Group Names

The Alarms Group Names tab is used to set up meaningful groupings/names for alarms.
Figure 3-56 Device – Group Names Configuration
120
Available groups are displayed in columns.
Indicates the groups in which the device is included /
excluded.
• Click on the Access Button to include this device / exclude this device from ALL
groups. (Include =
between include/exclude settings.
• Click on a Group column or on an individual cell (in the Access row) on the table
to include this device / exclude this device from the particular group.
(Include = / Exclude =
include/exclude settings.
Devices can be in more than one group at a time.
to save/download all information from the current page.
/ Exclude = ). Click on Access Button again to toggle
). Click on the Group again to toggle between