Figure 3-14 Outputs - Access Configuration - Honeywell VideoBloX User Manual

SYSTEM CONFIGURATION
Figure 3-14 Outputs – Access Configuration
Field Definitions
Field
HEADING
Output Number
GROUP NAME
(COLUMN)
OUTPUT ACCESS
(ROW)
Steps for Configuring Output Access
Set access for each video output using the following methods:
• Click on the Access button to include this output / exclude this output from ALL
• Click on a Group column or on an individual cell (in the Access row) on the table
62
Number assigned to the video output being configured.
Carries over from Outputs Detail window.
Available groups (up to 128, as defined on the Outputs
Group Name tab) are displayed in columns.
Indicates the groups in which the output is included /
excluded.
groups.
(Include = / Exclude =
include/exclude settings.
to include this output in / exclude this output from the particular group. (Include =
/ Exclude = ). Click on the Group again to toggle between include/exclude
settings.
Description
). Click on the Access button again to toggle between
Access tab