Tods (Time Of Day Events); Event Configuration; Figure 3-45 Honeywell Ademco Mux Control - Honeywell VideoBloX User Manual

SYSTEM CONFIGURATION

Figure 3-45 Honeywell Ademco MUX Control

Camera
Numbers
1-16

Tods (TIME OF DAY EVENTS)

Event Configuration

The Time of Day (Scheduled) Event can be used to perform automatic tasks based on a
specific time of day, or on a regularly scheduled time of day. The event will activate a
Sequence.
The fields necessary to set an Event that is triggered by the time of day are configured on
the Tods screen.
102
•
To select a MUX
Press Device Key (VCR) until Mux is displayed.
-
Select Mux number using numeric keypad.
-
MUX # 1 is Camera Input #10,301.
-
MUX Output will be displayed on selected monitor.
-
Select display mode: 2x2, 3x3, 4x4, Full Screen.
-
Record
Full Screen
2 x 2
3 x 3
4 x 4
VCR