Communications; Installer; Figure 3-6 System-Communications Configuration - Honeywell VideoBloX User Manual

SYSTEM CONFIGURATION

Communications

Click on the Communications Tab to define the system communication parameters.

Figure 3-6 System-Communications Configuration

Field Descriptions
Field
IPAddress
IPPort
Interpacket Delay
After entering the data in each field, click on
information from the current page.

Installer

The Installer Tab is not functional at this time.
48
Enter the IP address of the matrix. Contact your system
administrator for assistance.
WARNING: Entering an incorrect IP address can cause
severe disruption or degradation of your network.
Defines the IP Port being used by the matrix. Contact your
network administrator for assistance.
Defines the amount of delay between the transmissions of
data packets. The minimum recommended delay is 60. The
lower the delay, the faster uploads/downloads occur. Note
that lower delays have a greater impact on standard system
operation while downloading configuration.
Description
to save/download all