Jumper Settings - Honeywell VideoBloX User Manual

•
•
•
The front panel indications provide basic information relating to the systems overall
running condition and communication activity.
Five communication ports provide the following functions:
Port
Backplane Open collector
Ethernet
COM1
COM2
COM3

Jumper Settings

NETCPU &NETOSD modules are integrated in the same board. They can be enabled by
setting the jumpers on the right upper part of the board, see
Ethernet connection of NETCPU, plug the five jumpers on the lower position, indicated by
Figure
higher position, indicated by
Recoverable over current protection
Interface protection compliance with FCC, CE requirements
Built-in real-time clock
Type
Communications between CPU and various modules. Also
expanded as RS422 for interconnection between multiple
racks. Expansion also used for MVT (video titler) and
various DVR/ device controllers
Connect to Ethernet for the configuration using NETCFG,
for the operation using NETGUI, for the web browsing to
Ethernet port upgrade firmware and diagnostics, for the telnet log onto
Linux, for the 3rd part integration using TCP/IP Aux
protocol, for the satellite connection
Used for the third-party integration. Refer to
RS232/422
AUX Command List
RS232/422 Satellite port
RS232/422/485 Connect to keyboard, PIT
2-4. To enable the Ethernet connection of NETOSD, plug the five jumpers on the
Figure 2-5
Description
for more detailed information.
Figure
.
Honeywell
APPENDIX C:
2-4. To enable the
9