Figure 2-17 Upgrade Completed; Figure 2-18 Changing Password - Honeywell VideoBloX User Manual

Honeywell

Figure 2-17 Upgrade Completed

NOTE: IP address of NETCPU will be reset to default values after rebooting when
upgrading the Application folder. Default IP address is 192.168.1.9. Therefore, you need
to change your IP address so that it is in the same network segment with the NETCPU if
necessary.
10. To change the login password, click Change Password on the right upper part of the
web page. Figure 2-18 is displayed.

Figure 2-18 Changing Password

19