Alarms Access - Honeywell VideoBloX User Manual

SYSTEM CONFIGURATION
ALARM NOTES
Steps for configuring an Alarm
1. From the Alarms screen, select General.
2. Select the Alarm Number to configure.
3. Enter the Alarm Description (i.e., ALM 5 – Main Lobby Entry).
4. Check the Enabled box to enable monitoring of the alarm.
5. To activate a sequence upon opening of the contact, check the Contact Open
6. To activate a sequence upon closing of the contact, check the Contact Closed
7. Enter pertinent notes regarding the alarm in the Alarm Notes field.
8. If the Alarm is in an Alarm Queue, associate a specific camera with this alarm by
9. If the Alarm is in an Alarm Queue and a sequence is to be activated when the alarm
10. If the Alarm is in an Alarm Queue and a message is to be displayed when an alarm is
11. Select

Alarms Access

The Alarms Access tab is used to configure access to the alarms.
70
Free-form field for adding information about the alarm.
(i.e., "Door Status Monitor on Main Lobby Entry doors" OR
"Normally Closed contact activates Sequence 4 on
opening.")
Enabled box, assign a Priority and select/edit a Sequence.
Enabled box, assign a Priority and select/edit a Sequence.
checking the Auto Sequence Enabled box and selecting a camera using the drop
down box for either the Camera Number or Camera Name.
is acknowledged (Accepted), check the box to Enable the Accept Sequence
function. Select a Sequence using the drop down box for either the Sequence
Name or Sequence Number.
activated, check the box to Enable the Default Message and select a Message
using the drop down box for either Message Name or Message Number.
to save/download all information from the current page.