Figure 3-50 Sequences - Access Configuration - Honeywell VideoBloX User Manual

Figure 3-50 Sequences – Access Configuration
Heading
Access Button
Field Definitions
Steps for Configuring Sequence Access
1. From the Sequence screen, select the Access Tab.
2. Set access for each sequence using the following methods:
Field
HEADING
Sequence Number
Sequence Name
GROUP NAME
(COLUMN)
SEQUENCE
ACCESS (ROW)
• Click on the Access button to include this sequence in / exclude this sequence
from ALL groups. (Include =
to toggle between include/exclude settings.
• Click on a Group column or on an individual cell (in the Access row) on the table
to include
this sequence in / exclude this sequence from the particular group.
Number assigned to the keyboard being configured.
This field carries over from the Detail screen.
Name associated with this keyboard.
This field carries over from the Detail screen.
Available groups are displayed in columns.
Indicates the groups in which the sequence is included /
excluded.
/ Exclude =
Description
). Click on the Access button again
Honeywell
Access tab
111