Figure 3-34 Camera Mode; Figure 3-35 Monitor Mode - Honeywell VideoBloX User Manual

SYSTEM CONFIGURATION

Figure 3-34 Camera Mode

Monitor Mode

Figure 3-35 Monitor Mode

96
When there is no number entered, press "Clear" switch to the alternate view and
switch back when release.
Pressing "Enter" will switch to the alternate view.
•
Go-Back!
Press ← repeatedly (4 times) to undo previous camera selection.
-
•
Alter view
Press 'Enter' to switch to alter view if the alter view has set by user when no
-
digits entered.
Press 'Clear' to switch to the alternate view if the alternate view has been set by
-
user when no digits entered. Release 'Clear' switch to back.
•
To select a different monitor while in camera mode
Enter monitor number using numeric keypad, followed by Mon key.
-
The keyboard stays in "Camera" mode.
-
The keyboard will display the camera currently selected to that monitor.
-
•
Restricted Access to Monitors
Cameras have been restricted to be displayed on the Bay monitors only.
-
Supervisors "sign-on" will override this to allow any monitor to be selected.
-
•
To enter Monitor Mode, press the Mon key.