Figure 3-19 Alarms - Access Configuration - Honeywell VideoBloX User Manual

Figure 3-19 Alarms – Access Configuration
Heading
Access
Button
Field Definitions
Field
HEADING
Alarm Number
GROUP NAME
(COLUMN)
ALARMS ACCESS
(ROW)
Steps for Configuring Alarm Access
1. From the Alarms screen, select the Access Tab.
2. Set access for each alarm using the following methods:
• Click on the Access Button to include this alarm in / exclude this alarm from ALL
• Click on a Group column or on an individual cell (in the Access row) on the table
Physical address of the Alarm Input as determined by the
device it is connected to (ATM or I2C module). This field
carries over from the Alarms General screen.
Available groups are displayed in columns.
Indicates the groups in which the alarm is included /
excluded. (Unavailable, for future usage )
groups. (Include = /
between include/exclude settings.
to include this alarm in / exclude this alarm from the particular group.
(Include = / Exclude =
include/exclude settings.
Description
Exclude = ). Click on Access Button again to toggle
). Click on the Group again to toggle between
Honeywell
Access tab
71