Video Input Modules; Figure 2-26 Software Version - Honeywell VideoBloX User Manual

VideoBloX MODULES

Figure 2-26 Software Version

9. To upgrade the NETOSD firmware, click UPGRADE tab.
prompting you to make sure that the network is connected during file upgrade.
10. Click OK.
11. Refer to corresponding part in
firmware, change password and logout.
NOTE: In case that you forget the password, set SW8 of switch 4 to "1" to reset
password to default value (hvs). Refer to
information.

VIDEO INPUT MODULES

The video input module brings 16 video signals into the VideoBloX chassis. Each of the
inputs may be routed to 1 or more of the 64 backplane channels. All input modules have
16 video inputs, but can be switched to 16, 32, or 64 (maximum) outputs. They have
internal terminal switches.
24
Video Input Module
HVBM16
HVBM32
HVBM64
NETCPU Firmware Upgrade
DIP Switch Settings
Description
16 Inputs switch to 16 outputs
16 Inputs switch to 32 outputs
16 Inputs switch to 64 Outputs
Figure 2-13 is displayed,
to upgrade NETOSD
on page 10 for detailed