Figure 5-8 Inter-Link Start And End Address Of 1 - Honeywell VideoBloX User Manual

ST
2. In the 1 Slave chassis, two 1 x HVB16M64 input cards will be installed from
address 7 to address 27. Therefore, set 1 x HVB32LKI for channel 1
HVB32LKI for channel 33
HVB32LKI into Master chassis.

Figure 5-8 Inter-Link Start and End Address of 1

nd
3. In the 2 Slave chassis, another two 1 x HVB16M64 input cards will be installed from
address 28 to address 48. Therefore, set 1 x HVB32LKI for channel 1 - 32 and 1 x
64 address dip switch as below picture. Install those 2
¡ª
st
32 and 1 x
¡ª
Slave Chassis
Honeywell
143