Input Title - Honeywell VideoBloX User Manual

SYSTEM CONFIGURATION
DEDICATED VCR
Type
Address
Steps for Configuring Video Input Details
1. On the Inputs screen, select the Detail tab on the right side of the window.
2. Select the Input Number to be used for this input.
3. Enter the Physical I/P address of the input connection.
4. Select whether the input is a Static (fixed) or PTZ camera.
6. If audio is associated with this input, check the box to Enable audio and
7. To enable automatic Video Loss detection, check the Enabled box,
8. To enable automatic Video Restore detection, check the Enabled box,
9. To enable an Alternate View for this input, check the Enabled box and
10. To associate a Dedicated VCR or device with this input, select the device
11. Enter Notes about this input in this free-form field. It is helpful to include camera
12. Select

Input Title

The Inputs Title tab is used to enter all logical characteristics for the video input.
Input Title can be entered here as text on the Titled Video Output Module or on the PVT
channel.
52
Type of device as determined by the device configuration
tab. Standard VCR = Type 1. Mux = Type 2.
Control address for the VCR/Device associated with this
input.
If PTZ is selected, enter the PTZ Address. If the PTZ is connected via PIT44 through
Com 3, the Board Addr is useless.
enter the physical address of the audio input.
set the Priority, and select a Sequence to run when video loss is detected.
Edit the Sequence if needed.
set the Priority, and select a Sequence to run when video loss is detected.
Edit the sequence if needed.
set the Channel of the alternate view/input.
Type and Address. The type definition of device and the device command frame,
please refer section Device in this chapter.
Disable this option by selecting Disabled.
model number, lens, and location of power supply.
to save/download all information from the current page.