System; Time/Date Setting - Honeywell HMAX082 Owner's Operation Manual

7.3 SYSTEM

To access the system menu:
1. Access the main menu by pressing the 9 button, the 0
button, the 9 button, the 0 button, and then pressing the
lock button.
2. Access the system setup menu, by pressing the 3
button.

7.3.1 Time/Date Setting

To set the time and date or to disable the time/date display on the monitor(s), press the
1 button.
The first line displays the current setting.
The second line displays the format for
entering the time and date: HH:MM:SS
(hours, minutes, second), DD/MM/YY (day,
month, year).
1. The first two numbers on the third line
are flashing. Use the number buttons to
program a new time and date. Enter the
hours, minutes, and seconds then the
day, month, and year. Move the joystick
left or right to move to another field if desired. Once the setting is correct, press the
aux button to update the display setting (on the top line).
2. If the message, AUTO TO TURN OFF TIME/DATE is displayed, the time/date is
enabled. If the message, AUTO TO TURN ON TIME/DATE is displayed, the
time/date is disabled. Press the auto button to toggle between enabled and
disabled.
3. When the time and date are set as desired, press the lock button to exit the menu
and return to the System menu.
Rev. 1
04:44:42
HH:MM:SS
04:44:00
33
MAIN MENU
1 CAMERAS
2 MONITORS
3 SYSTEM
4 ALARMS
5 SOFTWARE
SYSTEM MENU
1 TIME/DATE SETTING
2 TIME/DATE FORMAT
3 MONITOR CONTROL
4 UNIVERSAL SEQUENCES
5 LANGUAGE
6 EVENT TIMERS
7 SALVO SWITCHING
SELECT OPTION
LOCK TO EXIT
SET TIME/DATE
18/11/03
DD/MM/YY
18/11/03
AUX TO SET TIME/DATE
AUTO TO TURN OFF TIME/DATE
LOCK TO EXIT
900.0560
18-July-2005