Network Configuration - Cisco 7945G Administration Manual

For cisco unified communications manager 6.1(3)
Hide thumbs Also See for 7945G:
Table of Contents

Advertisement

Chapter 4
Configuring Settings on the Cisco Unified IP Phone

Network Configuration

The Network Configuration menu displays device-specific network configuration settings on the phone
Table 4-18
Note
The phone also has a Network Configuration menu that you access directly from the Settings menu. For
information about the options on that menu, see the
Table 4-18
Network Configuration Menu Options
Option
Description
Load Server
Used to optimize installation time for phone firmware
upgrades and offload the WAN by storing images
locally, negating the need to traverse the WAN link for
each phone's upgrade.
You can set the Load Server to another TFTP server IP
address or name (other than the TFTP Server 1 or TFTP
Server 2) from which the phone firmware can be
retrieved for phone upgrades. When the Load Server
option is set, the phone contacts the designated server
for the firmware upgrade.
Note
RTP Control
Indicates whether the phone supports the Real-Time
Protocol
Control Protocol (RTCP). Settings include:
If this feature is disabled, several call statistic values
display as 0. For additional information, see the
following sections:
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
describes the options in this menu.
The Load Server option allows you to specify
an alternate TFTP server for phone upgrades
only. The phone continues to use TFTP Server
1 or TFTP Server 2 to obtain configuration
files. The Load Server option does not provide
management of the process and of the files,
such as file transfer, compression, or deletion.
Enabled
Disabled—default
Call Statistics Screen, page 7-10
Streaming Statistics, page 8-11
"Network Configuration Menu" section on page
To Change
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Device Configuration Menu
.
4-5.
4-27

Advertisement

Table of Contents
loading

This manual is also suitable for:

7965g

Table of Contents