Cisco 7945G Administration Manual page 140

For cisco unified communications manager 6.1(3)
Hide thumbs Also See for 7945G:
Table of Contents

Advertisement

Status Menu
Table 7-2
Status Messages on the Cisco Unified IP Phone 7965G and 7945G (continued)
Message
Description
Load Auth Failed
The phone could not load a configuration
file.
Load ID incorrect
Load ID of the software file is of the
wrong type.
Load rejected HC
The application that was downloaded is
not compatible with the phone's
hardware.
Load Server is
Indicates an invalid TFTP server
invalid
IP address or name in the Load Server
option.
No CTL installed
A certificate trust list (CTL) file is not
installed in the phone.
No default router
DHCP or static configuration did not
specify a default router.
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
7-6
Chapter 7
Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Possible Explanation and Action
Check that:
A good version of the configuration file exists on the
applicable server.
The phone load file being downloaded has not been
altered or renamed.
The phone load type is compatible; for example, you
cannot place a DEV load configuration file on a
REL-signed phone.
Check the load ID assigned to the phone (from
Cisco Unified Communications Manager, choose Device >
Phone). Verify that the load ID is entered correctly.
Occurs if you were attempting to install a version of
software on this phone that did not support hardware
changes on this newer phone.
Check the load ID assigned to the phone (from
Cisco Unified Communications Manager, choose Device >
Phone). Re-enter the load displayed on the phone. See the
"Firmware Versions Screen" section on page 7-9
the phone setting.
The Load Server setting is not valid. The Load Server
specifies a TFTP server IP address or name from which the
phone firmware can be retrieved for upgrades on the
phones.
Check the Load Server entry (from
Cisco Unified Communications Manager Administration
choose Device > Phone).
Occurs if security is not configured. If security is
configured, because the CTL file does not exist on the
TFTP server.
For more information, refer to Cisco Unified
Communications Manager Security Guide.
If the phone has a static IP address, verify that the
default router has been configured. See the
Configuration Menu" section on page 4-5
details.
If you are using DHCP, the DHCP server has not
provided a default router. Check the DHCP server
configuration.
to verify
"Network
section for
OL-17755-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

7965g

Table of Contents