Cisco 7945G Administration Manual page 76

Network Configuration Menu
Table 4-3 IPv4 Configuration Menu Options
Option Description
DHCP Indicates whether the phone has DHCP enabled or
disabled.
When DHCP is enabled, the DHCP server assigns the
phone an address. When DHCP is disabled, the
administrator must manually assign an IP address to the
phone.
IP Address Internet Protocol (IP) address of the phone.
If you assign an IP address with this option, you must also
assign a subnet mask and default router. See the Subnet
Mask and Default Router options in this table.
Subnet Mask Subnet mask used by the phone.
Default Router 1 Default router used by the phone (Default Router 1) and
optional backup routers (Default Router 2–5).
Default Router 2
Default Router 3
Default Router 4
Default Router 5
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
4-8
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
1. Unlock network configuration
options.
Scroll to the DHCP option and press
2.
the No softkey to disable DHCP, or
press the Yes softkey to enable DHCP.
Press the Save softkey.
3.
Unlock network configuration
1.
options.
Set the DHCP option to No.
2.
Scroll to the IP Address option, press
3.
the Edit softkey, and then enter a new
IP Address.
Press the Validate softkey and then
4.
press the Save softkey.
Unlock network configuration
1.
options.
Set the DHCP option to No.
2.
Scroll to the Subnet Mask option,
3.
press the Edit softkey, and then enter
a new subnet mask.
Press the Validate softkey and then
4.
press the Save softkey.
Unlock network configuration
1.
options.
Set the DHCP option to No.
2.
Scroll to the appropriate Default
3.
Router option, press the Edit softkey,
and then enter a new router IP address.
4. Press the Validate softkey.
5. Repeat Steps 3 and 4 as needed to
assign backup routers.
6. Press the Save softkey.
OL-17755-01