Cisco 7945G Administration Manual page 111

Chapter 5 Configuring Features, Templates, Services, and Users
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Do Not Disturb When DND is turned on, no audible rings occur during
(DND) the ringing-in state of a call.
You can configure the phone to have a softkey template
with a DND softkey or a phone-button template with
DND as one of the selected features.
The following DND-related parameters are configurable
in Cisco Unified Communications Manager
Administration:
•
•
•
Note
Extension Mobility Allows a user to temporarily apply a phone number and
user profile settings to a shared Cisco Unified IP Phone
(SCCP phones
by logging into the Extension Mobility service on that
only)
phone.
Extension Mobility can be useful if users work from a
variety of locations within your company or if they
share a workspace with coworkers.
Fast Dial Service Allows a user to enter a Fast Dial code to place a call.
Fast Dial codes can be assigned to phone numbers or
Personal Address Book entries. (See
table.)
Forced Controls the types of calls that certain users can place.
authorization codes
(FAC)
(SCCP phones
only)
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Do Not Disturb—This checkbox allows you to
enable DND on a per-phone basis. Choose Device >
Phone > Phone Configuration.
DND Incoming Call Alert—Choose the type of
alert to play on a phone for incoming calls when
DND is active. This parameter is located on both the
Common Phone Profile window and the Phone
configuration window (Phone Configuration value
takes precedence).
Include DND In BLF Status—Enables DND status
to override busy/idle state.
The user can use Cisco Unified
Communications Manager User Options pages
to enable/disable DND, and to change DND
Incoming Call Alert and DND Timeout settings.
Configuration Reference
Cisco Unified Communications Manager
Features and Services Guide, "Do Not Disturb"
chapter.
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, "Cisco Unified
Communications Manager Extension
Mobility" chapter.
For more information, refer to:
Cisco Unified Communications Manager
•
"Services" in this
Administration Guide, "Cisco Unified IP
Phone Services Configuration" chapter.
Cisco Unified Communications Manager
•
System Guide, "Cisco Unified IP Phone
Services" chapter.
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, "Client Matter Codes
and Forced Authorization Codes" chapter.
Telephony Features Available for the Phone
5-7