Sip Configuration Menu (Sip Phones Only) - Cisco 7945G Administration Manual

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-5
Designation
(Authentication icon)
(Encryption icon)

SIP Configuration Menu (SIP Phones Only)

The SIP Configuration menu is available on SIP phones. This menu contains these sub-menus:
•
•
SIP General Configuration Menu
The SIP General Configuration menu displays information about the configurable SIP parameters on a
SIP phone.
Table 4-6 SIP General Configuration Menu Options
Option Description
Preferred CODEC Displays the CODEC to use when a call is initiated. This value
will always be set to none.
Out of Band DTMF Displays the configuration of the out-of-band signaling (for
tone detection on the IP side of a gateway). The Cisco Unified
IP phone (SIP) supports out-of-band signaling by using the
AVT tone method. This value will always be set to avt.
Register with Proxy Displays if the phone must register with a proxy server during
initialization. This value will always be set to Yes.
Register Expires Displays the amount of time, in seconds, after which a
registration request expires.
Phone Label Displays the text that is displayed on the top right status line
of the LCD on the phone. This text is for end-user display only
and has no effect on caller identification or messaging. This
value will always be set to null.
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.1(3)
OL-17755-01
Cisco Unified Communications Manager Server Designations (continued)
Description
Appears as a shield and indicates that the connection
to the Cisco Unified Communications Manager is
authenticated. For more information about
authentication, refer to the Cisco Unified
Communications Manager Security Guide.
Appears as a padlock and indicates that the
connection to the Cisco Unified Communications
Manager is authenticated and encrypted. For more
information about authentication and encryption,
refer to the Cisco Unified Communications Manager
Security Guide.
SIP General Configuration Menu, page 4-13
Line Settings Menu (SIP Phones Only), page 4-14
Table 4-6 describes the options in this menu.
Device Configuration Menu
To Change
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
From Cisco Unified Communications
Manager Administration, choose
Device >
Device Settings > SIP Profile.
Display only—cannot configure.
4-13